Everyone knows about decorative concrete slabs. The question that people are very concerned about is, exactly how are they installed? This article will provide a detailed introduction to the construction and on-site installation steps of decorative concrete slabs, helping you better understand the application of this material.
Youdaoplaceholder0 I. Introduction to Decorative Concrete Slab
Decorative concrete slabs (also known as clear water slabs or cement slabs) are finished slabs formed by one-piece casting in factories. Their surface effects and size specifications can be customized according to customer requirements. These finished boards will undergo strict quality inspection before leaving the factory and be packed in wooden cases to ensure they are not damaged during transportation. When the panels arrive at the construction site, they can be installed directly.
Youdaoplaceholder0 2. Preparations before construction
Before the construction begins, it is necessary to make adequate preparations. This includes confirming the application scenarios and required specifications at the customer's site. The thickness of decorative concrete slabs is usually between 10 and 25mm. It is crucial to select the appropriate thickness of the slabs based on different application scenarios and requirements.
Youdaoplaceholder0 3. Construction and installation of decorative concrete slabs (clear water slabs)
Youdaoplaceholder0 Interior wall mounting :
For indoor walls under 4 meters in height, installation can be carried out by wet-tiling with 10mm mortar. This method is easy to operate and can ensure the tight combination of the board and the wall surface.
Before installation, the wall surface needs to be cleaned and leveled to ensure there is no dust, oil stains or other impurities.
Apply an appropriate amount of mortar to the back of the board, then stick it to the wall and use a scraper or trowel to smooth out the excess mortar.
Finally, use a level and a vertical ruler to check the flatness and verticality of the board to ensure the installation quality.
Youdaoplaceholder0 Exterior walls and above :
For installations over 4 meters in height or on outdoor walls, it is recommended to install them by dry-hanging. This method can not only ensure the stability of the board but also improve the construction efficiency.
Before installation, metal hangers or keels need to be installed on the wall surface as the supporting structure for the panels.
Use dedicated connectors to connect the plates with metal hangers or keels to ensure the firmness of the plates.
Finally, fill the gaps of the boards to enhance the overall aesthetic appeal and waterproof performance.
Youdaoplaceholder0 IV. Notes
During the construction process, it is necessary to ensure that all tools and materials are clean to avoid contaminating the boards.
After installation is completed, the panels should be protected to avoid impact or scratches.
Regularly clean and maintain the plates to extend their service life.
Decorative concrete slabs, with their unique charm and outstanding performance, are playing an increasingly important role in modern architecture. Through the introduction in this article, we believe that you have gained a deeper understanding of the construction and installation of decorative concrete slabs.
If you are looking for decorative panels for both indoor and outdoor use, concrete decorative panels are the perfect choice. Production in one will make any area where you install it more visually appealing. As long as you are careful and maintain the stone properly, it can remain beautiful for many years. Click here to learn about it Concrete decorative slab More information on styles.
